TCD燃烧系统对柴油机燃烧和排放性能改善效果的试验研究

为探究道依茨TCD2015柴油机上配备的导流燃烧系统(简称TCD燃烧系统,T表示涡轮增压器,Turbocharger,C表示进气中冷,Charge air cooling,D为柴油颗粒捕集器,Diesel particle filter)对改善柴油机燃烧性能和降低污染物排放的效果,采用单缸机试验对TCD燃烧系统在不同转速、负荷和过量空气系数下的燃烧和排放性能进行研究。试验结果表明不同工况下TCD燃烧系统燃油消耗率和Soot排放量均低于传统ω燃烧系统,燃油消耗率最大降幅为7.01%,Soot排放量最大降幅为86.67%,且低过量空气系数(1.2～1.6)下TCD燃烧系统仍具有较好的性能。为揭示TCD燃烧系统改善油气混合促进燃烧的机理,采用AVL Fire软件建立了柴油机性能仿真模型。计算结果表明,TCD燃烧系统的环状凸起结构将燃油导向内外两室,从而促进了缸内燃油发展过程,燃油当量比大于4的浓混合气区域燃油质量比例相比ω燃烧系统降幅最大为9.75%,活塞下移时TCD燃烧系统内油束撞击浅盘侧壁形成撞壁射流扩大了燃油扩散面积,从而改善了缸内油气混合质量,燃油当量比小于1的均匀混合气区域燃油质量比例相比ω燃烧系统降幅最大为7.45%,因此TCD燃烧系统能够有效改善柴油机的燃烧和排放性能,可应用于柴油机高负荷和低过量空气系数工况综合性能提升。研究结果可为柴油机燃烧系统开发和改进提供参考。     

欧美国家针叶树容器苗生产与启示

针叶树是芬兰、瑞典、挪威、美国、加拿大等欧美国家主要的商品林树种。容器苗是针叶树重要的育苗类型。与裸根苗比较，容器苗具有育苗周期更短、造林季节可延长、苗木适应性更广、苗木质量更一致的优点。因此，容器育苗成为精准林业发展的必然趋势。为了借鉴欧美容器育苗的技术方法，提高我国容器苗的质量，为我国针叶树容器苗发展提供参考，文中主要从4个方面综述了欧美国家检测与提高苗木质量的方法，即列举了针叶树常用的苗木质量检测指标，总结了育苗容器与育苗基质的改良进展，介绍了养分、水分、光照与温度等培养条件的优化手段，简要概述了容器苗病虫害防控的进展，提出了我国相关树种容器苗生产的启示与借鉴。     

不同行距配比对玉米光合生理指标及茎秆特性的影响

以‘大丰30’为试验材料,在同一密度下（75000株/hm²）设置5种不同行距配比,研究不同行距配比对玉米光合生理指标及茎秆力学特性的影响。结果表明：行距配比为40 cm×80 cm时,棒三叶的叶绿素含量(SPAD)在灌浆期达到峰值;行距配比为30 cm×90 cm时,棒三叶净光合速率在灌浆期最高。大口期开始,行距配比为40 cm×80 cm时,叶面积指数(LAI)最高。单株干物质积累量以40 cm×80 cm最高。各行距配比的茎秆硬皮穿刺强度与茎秆弯曲性能随着节位的下降均呈逐渐增强的趋势,从大到小为 40 cm×80 cm>50 cm×70 cm>30 cm×90 cm>60 cm×60 cm>20 cm×100 cm。穗长、穗粗、千粒重和穗粒数各处理间均有不同变化,行距配比为40 cm×80 cm时产量最高,比等行距60 cm×60 cm增产7.96%。由此可见,行距配比为40 cm×80 cm,有利于大穗型品种‘大丰30’的光合性能和茎秆强度的提高,从而达到抗倒伏增产的目的。     

云南不同气候带农业气候资源变化特征研究

为分析全省平均以及各气候带光能、热量、水分资源的时空变化特征,使用云南115站及6个气候带代表站1961—2018年的气候要素计算各地农业气候资源统计量。结果表明,光能资源变化以减少趋势为主,出现显著突变,各气候带太阳辐射变化可能会引起云南太阳辐射高低值中心发生变化,2009年以来辐射明显增加可能会导致太阳辐射出现新的变化趋势和突变点;热量资源一致显著增加,喜凉及喜温作物的活动积温、积温持续时间及无霜期长度均显著增加,并且呈现初日提前、终日推后的趋势,对作物生长有利;水分资源总体呈现减少趋势,尤其21世纪以来下降趋势明显,亚热带地区暖干化现象突出,干旱风险等级较高。     

Expression of Anti-Lipopolysaccharide Factor Isoform 3 in Chlamydomonas reinhardtii Showing High Antimicrobial Activity

Antimicrobial peptides are a class of proteins with antibacterial functions. In this study, the anti-lipopolysaccharide factor isoform 3 gene (ALFPm3), encoding an antimicrobial peptide from Penaeus monodon with a super activity was expressed in Chlamydomonas reinhardtii, which would develop a microalga strain that can be used for the antimicrobial peptide production. To construct the expression cluster, namely pH2A-Pm3, the codon optimized ALFPm3 gene was fused with the ble reporter by 2A peptide and inserted into pH124 vector. The glass-bead method was performed to transform pH2A-Pm3 into C. reinhardtii CC-849. In addition to 8 μg/mL zeocin resistance selection, the C. reinhardtii transformants were further confirmed by genomic PCR and RT-PCR. Western blot analysis showed that the C. reinhardtii-derived ALFPm3 (cALFPm3) was successfully expressed in C. reinhardtii transformants and accounted for 0.35% of the total soluble protein (TSP). Furthermore, the results of antibacterial assay revealed that the cALFPm3 could significantly inhibit the growth of a variety of bacteria, including both Gram-negative bacteria and Gram-positive bacteria at a concentration of 0.77 μM. Especially, the inhibition could last longer than 24 h, which performed better than ampicillin. Hence, this study successfully developed a transgenic C. reinhardtii strain, which can produce the active ALFPm3 driven from P. monodon, providing a potential strategy to use C. reinhardtii as the cell factory to produce antimicrobial peptides.     

基于应用型人才培养教学中思政教育的融入策略实施

思政教育是高职院校教学的重点内容,对学生的思想、行为会产生直接影响,同时与工匠精神存在紧密关系,需要对其予以融合。为了提升高职机械类专业教学的质量,引入思政教育极为重要,其在推动学生全面发展方面也发挥出了重要作用。基于此,主要以机械基础类专业教学为例,分析了高职机械类专业课程与思政教育的联系为切入点。同时,通过调整教学思路与路径,结合机械发展史展开思政教育,引入大国重器实际研发案例,落实全面评价这些思政教育的融入策略。     

Utilizing a DUALEM‐421 and inversion modelling to map baseline soil salinity along toposequences in the Hunter Valley Wine district

In the oldest commercial wine district of Australia, the Hunter Valley, there is the threat of soil salinization because marine sediments underlie the area. To understand the risk requires information about the spatial distribution of soil properties. Electromagnetic (EM) induction instruments have been used to identify and map the spatial variation of average soil salinity to a certain depth. However, soils vary with depth dependent on soil forming factors. We collected data from a single‐frequency and multiple‐coil DUALEM‐421 along a toposequence. We inverted this data using EM4Soil software and evaluated the resultant 2‐dimensional model of true electrical conductivity (σ – mS/m) with depth against electrical conductivity of saturated soil pastes (EC_p – dS/m). Using a fitted linear regression (LR) model calibration approach and by varying the forward model (cumulative function‐CF and full solution‐FS), inversion algorithm (S1 and S2), damping factor (λ) and number of arrays, we determined a suitable electromagnetic conductivity image (EMCI), which was optimal (R² = 0.82) when using the full solution, S2, λ = 3.6 and all six coil arrays. We conducted an uncertainty analysis of the LR model used to estimate the electrical conductivity of the saturated soil‐paste extract (EC_e – dS/m). Our interpretation based on estimates of EC_e suggests the approach can identify differences in salinity, how these vary with parent material and how topography influences salt distribution. The results provide information leading to insights into how soil forming factors and agricultural practices influence salinity down a toposequence and how this can guide soil management practices.     

菠萝蜜种子淀粉制备香草兰微胶囊的工艺研究

以菠萝蜜种子淀粉为壁材,采用饱和水溶液法制备香草兰精油微胶囊,以包埋产率为指标,采用响应面分析法对微胶囊的包埋条件进行优化探讨。结果表明:5个单因素中,影响最显著的因素为壁芯材比例、包埋温度和包埋时间。响应面优化得到香草兰精油微胶囊的最佳工艺条件为壁芯材比例为7.5∶1;包埋时间72 min;包埋温度54℃,此条件下的包埋产率为(95.46±0.2)%,包埋率为(76.35±0.6)%,载油量为(27.73±0.3)%。试验证明,此条件结果与模型预测值相吻合,此工艺条件可为菠萝蜜种子淀粉包埋香草兰精油微胶囊工艺提供理论依据。     

不同施肥处理对枳及柠檬容器苗生长的影响

研究9个不同施肥处理对枳及柠檬容器苗生长的影响。结果表明:不同施肥处理对枳容器苗的苗高、地径、分枝高度及嫁接后柠檬苗的发芽率、株高、茎粗、分枝数及生物量都存在显著差异;不同施肥处理对枳及柠檬容器苗综合表现最好的为T4(撒施柠檬专用肥1.6 g)处理,其次是T2(撒施尿素0.6 g)、T3(撒施柠檬专用肥0.8 g)处理,表现最差的是T8(浇施5%柠檬专用肥)和T7(浇施3%柠檬专用肥)处理。在一定施肥浓度范围内,施肥对嫁接后柠檬容器苗的生物量积累有明显促进作用。柠檬容器苗培育时建议采用在基质中撒施柠檬专用肥1.6 g。